NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A round 1x4-slat outdoor side table on collapsible X-leg supports, sized to match Adirondack chair height.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Tabletop boards, longest | 2 | 3/4" × 3 1/2" × 31 1/2" | Cedar 1x4 | ☐ |
| Tabletop boards, second | 2 | 3/4" × 3 1/2" × 30 7/16" | Cedar 1x4 | ☐ |
| Tabletop boards, third | 2 | 3/4" × 3 1/2" × 27 1/16" | Cedar 1x4 | ☐ |
| Tabletop boards, shortest | 2 | 3/4" × 3 1/2" × 20" | Cedar 1x4 | ☐ |
| Tabletop supports Underside cross-pieces holding the boards before the circle is cut. | 2 | 3/4" × 1 1/2" × 29 3/4" | Cedar 1x2 | ☐ |
| Leg supports | 2 | 3/4" × 1 1/2" × 23 1/2" | Cedar 1x2 | ☐ |
| Spacers | 2 | 3/4" × 1 1/2" × 3 1/2" | Cedar 1x2 | ☐ |
| Legs Both ends cut at 45°, parallel to each other. | 4 | 3/4" × 1 1/2" × 30" | Cedar 1x2 | ☐ |
| Base supports (stretcher) | 2 | 3/4" × 1 1/2" × 17 1/2" | Cedar 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Cedar, 1x4, 10 ft Weather-resistant species recommended; pallet wood also works. | 2 each | ☐ |
| Cedar, 1x2, 8 ft | 3 each | ☐ |
| 1-1/2" to 2" self-tapping exterior screws Star bit — a standard bit strips out. | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
| Sandpaper | 1 pack | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Jigsaw, Random Orbit Sander. Materials: Cedar, 1x4, 10 ft, Cedar, 1x2, 8 ft, 1-1/2" to 2" self-tapping exterior screws, Wood glue, Sandpaper
Starting from the center, attach the tabletop supports to the underside of the tabletop boards with 1-1/4" screws and glue, working outward and leaving a 1/2" gap between boards. Once assembled, hold a string at the center with a pencil tied to the other end and draw a circle. Cut the circle with a jigsaw and sand the edges smooth.
Tools: Drill / Driver, Random Orbit Sander. Materials: Cedar, 1x2, 8 ft, 1-1/2" to 2" self-tapping exterior screws, Wood glue
Lay the leg supports on the underside of the table and attach with 2" screws and glue. Round the corners for a softer look.
Tools: Drill / Driver, Random Orbit Sander. Materials: Cedar, 1x2, 8 ft, 1-1/2" to 2" self-tapping exterior screws, Wood glue
Round the corners of the spacers and attach them to the leg supports with 1-1/4" fasteners and glue.
Tools: Drill / Driver. Materials: Cedar, 1x2, 8 ft, 1-1/2" to 2" self-tapping exterior screws
Attach the legs to the tabletop through the leg supports and spacers. For a collapsible table, use a removable bolt at this joint instead of a screw.
Tools: Drill / Driver. Materials: 1-1/2" to 2" self-tapping exterior screws
Attach the crossing legs to each other at the center with a screw. For a collapsible table, use a removable bolt here as well.
Tools: Drill / Driver. Materials: Cedar, 1x2, 8 ft, 1-1/2" to 2" self-tapping exterior screws
Attach the base support stretchers between the legs near the bottom for added stability.