Round Outdoor Adirondack Side Table

Starting from the center, attach the tabletop supports to the underside of the tabletop boards with 1-1/4" screws and glue, working outward and leaving a 1/2" gap between boards. Once assembled, hold a string at the center with a pencil tied to the other end and draw a circle. Cut the circle with a jigsaw and sand the edges smooth.

Lay the leg supports on the underside of the table and attach with 2" screws and glue. Round the corners for a softer look.

Round the corners of the spacers and attach them to the leg supports with 1-1/4" fasteners and glue.

Attach the legs to the tabletop through the leg supports and spacers. For a collapsible table, use a removable bolt at this joint instead of a screw.

Attach the crossing legs to each other at the center with a screw. For a collapsible table, use a removable bolt here as well.

Attach the base support stretchers between the legs near the bottom for added stability.