NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A solid round-top side table on a crossed-leg base, glued up from 2x4 or 2x6 stock. The circle is cut after glue-up with a jigsaw.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs 2x6 version: 4 @ 2x6 @ 18-1/2". | 4 | 1 1/2" × 3 1/2" × 16 1/2" | 2x4 | ☐ |
| Base cross pieces Long-point measurement, one end cut at 45°. 2x6 version: 2 @ 10". | 2 | 1 1/2" × 1 1/2" × 9" | 2x2 | ☐ |
| Tabletop boards Glued up then cut round. 2x6 version: 3 @ 2x6 @ 16-1/2". | 3 | 1 1/2" × 3 1/2" × 10 1/2" | 2x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft (Soft Pine) For the 2x4 version. Choose yellow-toned boards with minimal knots, cracks, and warp. Use a 2x6 @ 12 ft for the larger version instead. | 1 each | ☐ |
| 2x2, 24" (Pine) Must be a true 1-1/2" x 1-1/2". Base cross piece. | 1 each | ☐ |
| Self-tapping trim screws, 2" | 1 box | ☐ |
| Pocket hole screws, 1-1/2" | 1 box | ☐ |
| Wood glue | 4 oz | ☐ |
| Leveling feet | 4 each | ☐ |
| Finish | 1 kit | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.