Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Rolling Vertical Scrap Wood Storage
If you have scrap wood piling up all around you, you need this rolling vertical scrap wood storage station.
- Difficulty
- Intermediate
- Time
- 3–6 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Base | 1 | 3/4" × 24" × 72" | — | ☐ |
| Plywood Edge | 1 | 3/4" × 3" × 72" | — | ☐ |
| Vertical Posts | 5 | 1" × 3" × 60" | — | ☐ |
| Horizontal Post | 1 | 1" × 3" × 72" | — | ☐ |
| Racks with 10 degree angle on one end | 20 | 1" × 3" × 12" | — | ☐ |
| Cubby Back | 1 | 3/4" × 9" × 72" | — | ☐ |
| Cubby Sides | 4 | 3/4" × 9" × 11" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood sheet, 3/4" x 4' x 8' | 1 board | ☐ |
| Boards, 8' x 2" x 4" | 7 board | ☐ |
| 3" Locking casters | 4 each | ☐ |
| Box of 1 1/4" Kreg pocket hole screws (see tools list) | 1 each | ☐ |
| Box of 2 1/2" Kreg pocket hole screws (see tools list) | 1 each | ☐ |
| Wood glue | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.