Notch- Difficulty
- Easy
- Time
- 2.3–4 hours
- Cost
- $$
About this build
This rolling laundry cart is perfect for keeping essential laundry items close by while doing your laundry! If you have trouble reaching the shelf above your machines or just want easier access, this laundry cart is perfect for fitting between your laundry machines.
Tools
Essential
- Drill / Driver
- Miter Saw
- Pocket Hole Jig
- Random Orbit Sander
- Table Saw
Optional / nice to have
- Bar / Pipe Clamps
Materials
| Item | Qty |
|---|---|
| Boards, 8'x1"x8" | 2 board |
| 2" Rubber Casters | 4 each |
| Drawer Pull of your choice | 1 each |
| Wood Glue | 1 each |
| Stain | 1 each |
| Sealant | 1 each |
Overall cost: $$. Lumber prices vary by region, species, and season, so we give a band rather than a figure we would only be pretending to know.
Cut list
| Part | Qty | T × W × L |
|---|---|---|
| Front and Back | 2 | 3/4" × 7" × 24" |
| Shelves | 3 | 3/4" × 7" × 26" |
| Trim | 6 | 1/4" × 1/4" × 26" |
What to buy
Buy 4 boards at 8 ft.
3/4" × 7"
2 boards
1/4" × 1/4"
2 boards
Assumes 8 ft stock, a 1/8" saw kerf, and buying each part at its own width. Change the board size or kerf on the full board plan →
Instructions
1Attach Bottom Shelf
Drill pocket holes in the short ends of each of the shelves. Attach one shelf to the ends of the front and back flush with the bottom edge.
2Attach Shelves
Attach the other two shelves the same way with 11" of space in between.
3Attach Trim
Attach the trim pieces on the outside edge of the top of each shelf using wood glue and clamps.
4Attach Casters
Attach the casters onto the underside of the bottom shelf. We attached ours to the end.
5Attach Handle
Attach the handle approximately 5" down from the top of the front.
6Enjoy!
Enjoy your handiwork and tag @CharlestonCrafted on Instagram with a picture!
Tags
- Hampers
- Beginner
Reviews & builds
No reviews yet
Sign in to review this plan or share your build.
No reviews yet. Be the first to build this.