NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A workbench with a recessed miter saw shelf and two rolling tool carts that park underneath — a full shop that folds into one footprint when the car needs the garage.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bench frame rails | 6 | 1 1/2" × 3 1/2" × 49" | — | ☐ |
| Bench frame ends | 4 | 1 1/2" × 3 1/2" × 28" | — | ☐ |
| Bench legs | 8 | 1 1/2" × 3 1/2" × 39 1/2" | — | ☐ |
| Bench side skins See the plywood cutting diagrams before you rip anything. | 2 | 1/4" × 31" × 39 1/2" | Plywood | ☐ |
| Benchtops | 2 | 3/4" × 31" × 52 1/4" | Plywood | ☐ |
| Bottom supports | 4 | 1 1/2" × 3 1/2" × 29 1/2" | — | ☐ |
| Miter shelf trim Cut to the width of YOUR saw — 24" is only what the source build used. | 2 | 1 1/2" × 3 1/2" × 24" | — | ☐ |
| Miter shelf panels Width of your saw x 31". | 2 | 3/4" × 24" × 31" | Plywood | ☐ |
| Cart tops/bottoms | 2 | 3/4" × 30" × 48" | Plywood | ☐ |
| Cart shelf ends Cut from scraps — see the cutting diagrams. | 4 | 3/4" × 8 1/4" × 30" | Plywood | ☐ |
| Cart frame slats | 24 | 3/4" × 1 1/2" × 28" | — | ☐ |
| Cart shelves | 8 | 3/4" × 8 1/4" × 28" | Plywood | ☐ |
| Cart shelf backs | 4 | 1/4" × 28 3/4" × 30" | Plywood | ☐ |
| Cart sides | 4 | 3/4" × 29 1/2" × 48" | Plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet Benchtop, cart bodies, and shelves. Sanded shop-grade is fine; this is a fixture, not furniture. | 4 each | ☐ |
| Plywood, 1/4", 4x8 sheet Bench side skins and cart shelf backs. | 2 each | ☐ |
| 2x4, 8 ft Bench frames, legs, and miter shelf trim. | 11 each | ☐ |
| 1x2, 8 ft Cart frames, shelf cleats, and benchtop tool cleats. | 8 each | ☐ |
| Casters, 3", with brakes Four per cart. Buy all eight the same height — the cut list depends on it. | 8 each | ☐ |
| Screws, #10 x 3", self-tapping All the 2x4 framing. | 100 each | ☐ |
| Screws, #8 x 2", self-tapping Cart frames and cleats. | 60 each | ☐ |
| Screws, 3/4", pan head Caster mounting. | 32 each | ☐ |
| Staples, 18 ga, 2" and 1-1/4" Plywood skins, shelves, and tops. Brads work with enough glue. | 2 box | ☐ |
| Wood glue | 16 oz | ☐ |
| Cart handles Two per cart. Anything you can grab with a gloved hand. | 4 each | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.