NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A gently rocking cradle stand sized to hold a Moses basket, with jigsaw-cut rockers you sand to match. The rockers are the whole job.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Rockers Curve the bottom edge; cut both and sand to match exactly. | 2 | 3/4" × 3 1/2" × 31" | 1x4 | ☐ |
| Side top supports | 2 | 3/4" × 1 1/2" × 16" | 1x2 | ☐ |
| Legs Bottom ends scribed to the rocker arc and cut. | 4 | 3/4" × 2 1/2" × 21" | 1x3 | ☐ |
| Cradle boards (1x3) Cut to your Moses basket's width so it seats firmly — 18" shown. | 2 | 3/4" × 2 1/2" × 18" | 1x3 | ☐ |
| Cradle boards (1x2) Match to your basket width. | 2 | 3/4" × 1 1/2" × 18" | 1x2 | ☐ |
| Center support | 1 | 3/4" × 5 1/2" × 16" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x4 board, 8 ft (Pine) Rockers. | 1 each | ☐ |
| 1x2 board, 6 ft (Pine) | 1 each | ☐ |
| 1x3 board, 10 ft (Pine) Legs and basket cradle boards. | 1 each | ☐ |
| 1x6 board, 16" (Pine) Center support under the basket. Two 1x4s work too. | 1 each | ☐ |
| Pocket-hole screws, 1-1/4" | 30 each | ☐ |
| Wood glue | 2 oz | ☐ |
| Sandpaper, coarse to fine | 6 sheet | ☐ |
| Non-toxic finish It cradles a newborn — use a baby-safe finish or leave raw. | 8 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.