NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A compact wooden high chair in the classic restaurant style, built from 1x2s with 5° splayed legs. Light enough to move, stable enough to trust.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs Both ends 5° parallel to each other. | 4 | 3/4" × 1 1/2" × 26 3/16" | 1x2 | ☐ |
| Bottom side rails 5° ends NOT parallel, long point to long point. | 2 | 3/4" × 1 1/2" × 15" | 1x2 | ☐ |
| Middle side rails 5° ends NOT parallel, long point to long point. | 2 | 3/4" × 1 1/2" × 11 3/4" | 1x2 | ☐ |
| Top side rails 5° ends NOT parallel, long point to long point. | 2 | 3/4" × 1 1/2" × 10 11/16" | 1x2 | ☐ |
| Bottom supports 5° ends NOT parallel, long point to long point. | 2 | 3/4" × 1 1/2" × 16" | 1x2 | ☐ |
| Seat back 5° ends NOT parallel, long point to long point. | 1 | 3/4" × 3 1/2" × 12 9/16" | 1x4 | ☐ |
| Front Ends beveled 5°, NOT parallel, short point to short point. | 1 | 3/4" × 1 1/2" × 12" | 1x2 | ☐ |
| Seat Ends beveled 5°, NOT parallel, short point to short point. | 1 | 3/4" × 9 1/4" × 13" | 1x10 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x2 board, 8 ft (Pine) Legs, rails, supports, front. | 3 each | ☐ |
| 1x4 board, 15" (Pine) Seat back. | 1 each | ☐ |
| 1x10 board, 15" (Pine) Seat. Or glue up three 1x4s. | 1 each | ☐ |
| Pocket-hole screws, 1-1/4" | 40 each | ☐ |
| Wood glue | 3 oz | ☐ |
| Wood filler Expect three applications to fill the pocket holes flush. | 4 oz | ☐ |
| Primer, paint, and topcoat | 12 oz | ☐ |
| Safety strap and belt Required — a high chair needs a center strap and a restraint. | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.