NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A twin daybed built entirely from small pocket-hole rectangles — no plywood, no panels, just repeated frames that read as one geometric piece.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Rectangle sides (grid) | 24 | 3/4" × 1 1/2" × 12" | 1x2 | ☐ |
| Rectangle-to-rectangle joiners | 9 | 3/4" × 1 1/2" × 5 1/2" | 1x2 | ☐ |
| Rectangle end joiners | 6 | 3/4" × 1 1/2" × 4 1/4" | 1x2 | ☐ |
| Rectangle tops and bottoms | 24 | 3/4" × 1 1/2" × 6 1/2" | 1x2 | ☐ |
| Back top rail and cleats | 3 | 1 1/2" × 1 1/2" × 75" | 2x2 | ☐ |
| Side aprons | 2 | 1 1/2" × 2 1/2" × 75" | 2x3 | ☐ |
| Legs | 4 | 1 1/2" × 1 1/2" × 30" | 2x2 | ☐ |
| Arm tops | 2 | 1 1/2" × 1 1/2" × 39" | 2x2 | ☐ |
| Arm aprons | 2 | 1 1/2" × 2 1/2" × 39" | 2x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x2 board, 8 ft (Pine) All 63 pieces of the rectangle grid come from this stock — cut every piece before assembling anything. | 7 each | ☐ |
| 2x2 board, 8 ft (Pine) Legs, back top rail, and cleats. | 6 each | ☐ |
| 2x3 board, 8 ft (Pine) The load-bearing aprons — this is what the mattress actually rests on. | 3 each | ☐ |
| Pocket-hole screws, 1-1/4" and 2-1/2" | 150 each | ☐ |
| Wood glue | 6 oz | ☐ |
| Mattress slats or bunkie board Cut slats from scrap 1x stock spaced per your mattress maker's guidance, or buy a bunkie board. | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.