Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Record Player Cabinet
This record player storage cabinet is made completely out of plywood.
- Difficulty
- Intermediate
- Time
- 5–9.8 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bottom | 1 | 3/4" × 18" × 47" | — | ☐ |
| Sides | 2 | 3/4" × 18" × 27" | — | ☐ |
| Inside Panel | 1 | 3/4" × 18" × 22 1/4" | — | ☐ |
| Record Display Base | 1 | 3/4" × 14" × 28 1/4" | — | ☐ |
| Left Permanent Shelf | 1 | 3/4" × 18" × 18" | — | ☐ |
| Record Display Mid Piece | 1 | 3/4" × 7 3/4" × 14" | — | ☐ |
| Record Display Back | 1 | 3/4" × 7 3/4" × 13 3/4" | — | ☐ |
| Top Left | 1 | 3/4" × 18" × 18" | — | ☐ |
| Back Top Piece | 1 | 3/4" × 4" × 28 1/4" | — | ☐ |
| Record Holder Piece | 1 | 3/4" × 4 5/8" × 28 1/4" | — | ☐ |
| Record Storage Front | 1 | 3/4" × 8 1/2" × 29 3/4" | — | ☐ |
| Left Door | 1 | 3/4" × 13 3/4" × 19 1/2" | — | ☐ |
| Left Back | 1 | 1/4" × 19 1/4" × 22 1/8" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| Plywood, 3/4" Thick Half Sheet | 1 board | ☐ |
| 1 1/4" Kreg Pocket Hole Screws | 63 each | ☐ |
| 1 1/4" Brad nails | 40 each | ☐ |
| Set of Concealed Hinges | 1 each | ☐ |
| Knob | 1 each | ☐ |
| Wood Glue | 1 each | ☐ |
| Wood Filler | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.