Loading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A vintage soda-crate-style tote with a cut-out handle — for condiments, garden tools, or craft supplies. A one-board scrap build with a jigsaw handle.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Handle / center divider Two 1" holes + jigsaw cut-out for the grip; top corners clipped 45° and rounded. | 1 | 3/4" × 7 1/4" × 9 1/2" | 1x8 | ☐ |
| Long sides | 4 | 3/4" × 5 1/2" × 11" | 1x6 | ☐ |
| Bottom / end pieces | 2 | 3/4" × 5 1/2" × 9 1/2" | 1x6 | ☐ |
| End pieces | 2 | 3/4" × 5 1/2" × 4 3/8" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x8, 2 ft Handle/divider board — reclaimed or pallet wood is ideal. | 1 each | ☐ |
| 1x6, 4 ft Sides and bottom. | 1 each | ☐ |
| Finish nails, 2 in | 1 box | ☐ |
| Wood glue | 1 bottle | ☐ |
| Finish Optional — leave reclaimed wood raw for patina. | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Hole Saw Kit, Jigsaw. Materials: 1x8, 2 ft
Cut the handle from the 1x8. Drill two 1" holes with a hole saw where the ends of the hand-hole will be, then jigsaw out the waste between them to make the grip. Clip the top corners at 45° off square and round the top edge with the jigsaw for the crate look.
Tools: Brad Nailer. Materials: 1x8, 2 ft, 1x6, 4 ft, Finish nails, 2 in, Wood glue
Attach the side pieces to the handle board with glue and 2" finish nails — a nailer makes this go fast. The handle board is the center spine, so the sides register off it.
Tools: Brad Nailer. Materials: 1x6, 4 ft, Finish nails, 2 in, Wood glue
Attach the remaining side pieces the same way, glue and 2" finish nails, to build out the box on both sides of the handle.
Tools: Brad Nailer, Random Orbit Sander. Materials: 1x6, 4 ft, Finish nails, 2 in, Wood glue, Finish
Tack the bottom on with finish nails and glue to close the caddy. Soften any sharp edges. Leave reclaimed wood raw for patina, or clean it up and finish.