NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A shallow pull-out tray on slides that retrofits into an existing base cabinet — turn a deep, awkward shelf into a drawer you can actually reach the back of.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Tray sides Cut to your cabinet depth. | 2 | 3/4" × 5 1/2" × 20" | 1x6 | ☐ |
| Tray front/back Cut to your opening minus slide clearance. | 2 | 3/4" × 5 1/2" × 13" | 1x6 | ☐ |
| Tray bottom | 1 | 1/4" × 14 1/2" × 20" | 1/4" plywood | ☐ |
| Slide rails | 2 | 1 1/2" × 1 1/2" × 21" | 2x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x6 board, 8 ft (Pine) Tray box. | 1 each | ☐ |
| 2x2 board, 4 ft (Pine) Slide rails / base. | 1 each | ☐ |
| 1/4" plywood scrap Tray bottom. | 1 each | ☐ |
| 21" drawer slides Side/bottom mount. | 1 pair | ☐ |
| Pocket and wood screws, 1-1/4" and 2" | 30 each | ☐ |
| Finish nails, 1-1/4" | 20 each | ☐ |
| Wood glue | 3 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.