NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-hung basket-style shelf with 30°-angled sides and a gapped front edge for airflow — built from a handful of 1x6 and 1x3 offcuts, sized here as the larger of two published sizes.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Back | 1 | 3/4" × 5 1/2" × 26 1/2" | 1x6 board, 72" total (larger bin) | ☐ |
| Bottom | 1 | 3/4" × 2 1/2" × 26 1/2" | 1x3 board, 26-1/2" total (larger bin) | ☐ |
| Sides Cut at 30° angles. Smaller bin: 5-1/2" sides. | 2 | 3/4" × 5 1/2" × 8 1/2" | 1x6 board, 72" total (larger bin) | ☐ |
| Front Smaller bin uses a 1x3 for the bottom/front pairing instead — see source for the swapped size. | 1 | 3/4" × 5 1/2" × 26 1/2" | 1x6 board, 72" total (larger bin) | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x6 board, 72" total (larger bin) | 6 ft | ☐ |
| 1x3 board, 26-1/2" total (larger bin) | 3 ft | ☐ |
| Brad nails, 1-1/4" | 30 each | ☐ |
| Wood glue | 2 oz | ☐ |
| Self-tapping screws, 2-1/2", for hanging | 3 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.