NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A long three-bay console with deep drawers flanking a pair of doors, faced in printer's-style plank fronts. Big, boxy, a lot of cabinetry.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Face frame long rails | 2 | 1 1/2" × 1 1/2" × 72" | 2x2 | ☐ |
| Face frame stiles | 8 | 1 1/2" × 1 1/2" × 34 1/2" | 2x2 | ☐ |
| Face frame dividers Back face frame omits the middle drawer dividers. | 9 | 1 1/2" × 1 1/2" × 22" | 2x2 | ☐ |
| Face planks (wide) | 24 | 3/4" × 2 1/2" × 21 3/4" | 1x3 | ☐ |
| Face planks (narrow) | 18 | 3/4" × 1 1/2" × 21 3/4" | 1x2 | ☐ |
| Face plank caps | 6 | 3/4" × 1 1/2" × 22 1/2" | 1x2 | ☐ |
| Box corners | 4 | 1 1/2" × 1 1/2" × 15 3/4" | 2x2 | ☐ |
| Box top/bottom | 2 | 3/4" × 15 3/4" × 69" | 3/4" plywood | ☐ |
| Box dividers | 4 | 3/4" × 15 3/4" × 31" | 3/4" plywood | ☐ |
| Drawer-slide supports | 4 | 3/4" × 1 1/2" × 15 3/4" | 1x2 | ☐ |
| Drawer sides Cut to fit your openings and slides. | 6 | 3/4" × 5 1/2" × 19 1/2" | 1x6 | ☐ |
| Drawer front/back Cut to fit. | 6 | 3/4" × 5 1/2" × 17" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood Main box, ripped into 15-3/4" strips. Add a second sheet if you want shelves. | 1 sheet | ☐ |
| 2x2, 8 ft (Pine) Face frames and box corners. | 8 each | ☐ |
| 1x3, 8 ft (Pine) Door/drawer face planks. | 6 each | ☐ |
| 1x2, 8 ft (Pine) Door/drawer face planks. | 6 each | ☐ |
| 1x6, 10 ft (Pine) Drawer boxes. | 2 each | ☐ |
| 16" euro drawer slides | 3 pair | ☐ |
| Inset hinges | 3 set | ☐ |
| Cup-style handles | 24 each | ☐ |
| Pocket hole screws, 1-1/4" and 2-1/2" | 1 box | ☐ |
| Wood glue | 12 oz | ☐ |
| Finish | 1 kit | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.