NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A kid-sized toy coffee cart with a shelf and dowel legs, paired with a jigsawed toy espresso machine complete with a dowel handle, knobs, and steam wand.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Cart bottom | 1 | 3/4" × 11 1/4" × 25 1/2" | 1x12, 10 ft | ☐ |
| Cart sides | 2 | 3/4" × 11 1/4" × 17 1/2" | 1x12, 10 ft | ☐ |
| Cart center panel | 1 | 3/4" × 9 1/4" × 24" | 1x10, 2 ft | ☐ |
| Cart shelf | 1 | 3/4" × 11 1/4" × 24" | 1x12, 10 ft | ☐ |
| Cart top support | 1 | 3/4" × 1 1/2" × 26 1/2" | 1x2, 4 ft | ☐ |
| Cart top | 1 | 3/4" × 11 1/4" × 32 1/2" | 1x12, 10 ft | ☐ |
| Cart legs | 4 | 2" × 2" × 3" | 2" diameter dowel, 2 ft | ☐ |
| Espresso machine sides | 2 | 3/4" × 7 1/4" × 9 1/2" | 1x8, 4 ft | ☐ |
| Espresso machine front/back | 2 | 3/4" × 7 1/4" × 12" | 1x8, 4 ft | ☐ |
| Espresso machine top | 1 | 3/4" × 1 1/2" × 13 1/2" | 1x2, 4 ft | ☐ |
| Espresso machine detail board, wide | 1 | 3/4" × 3 1/2" × 12" | 1x4, 1 ft | ☐ |
| Espresso machine detail board, narrow | 1 | 3/4" × 2 1/2" × 12" | 1x3, 2 ft | ☐ |
| Espresso machine small blocks | 2 | 3/4" × 2 1/2" × 3 1/2" | 1x3, 2 ft | ☐ |
| Espresso machine small trim | 2 | 3/4" × 1 1/2" × 2" | 1x2, 4 ft | ☐ |
| Espresso cup holder | 1 | 2" × 2" × 1 1/2" | 2" diameter dowel, 2 ft | ☐ |
| Handle | 1 | 3/4" × 3/4" × 5" | 3/4" diameter dowel, 12 in | ☐ |
| Knobs | 2 | 2" × 2" × 1/2" | 2" diameter dowel, 2 ft | ☐ |
| Steam wand | 1 | 3/4" × 3/4" × 6" | 3/4" diameter dowel, 12 in | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 10 ft | 1 each | ☐ |
| 1x10, 2 ft | 1 each | ☐ |
| 1x2, 4 ft | 1 each | ☐ |
| 1x8, 4 ft | 1 each | ☐ |
| 1x3, 2 ft | 1 each | ☐ |
| 1x4, 1 ft | 1 each | ☐ |
| 2" diameter dowel, 2 ft | 1 each | ☐ |
| 3/4" diameter dowel, 12 in | 1 each | ☐ |
| Self-tapping wood screws, 2" | 8 each | ☐ |
| Brad nails, 1-1/4" and 5/8" | 60 each | ☐ |
| Wood glue | 3 oz | ☐ |
| Primer and paint | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver. Materials: 1x12, 10 ft, 2" diameter dowel, 2 ft, Self-tapping wood screws, 2"
Attach the dowel legs to the bottom shelf with 2" screws, two per leg.
Tools: Brad Nailer. Materials: 1x12, 10 ft, 1x10, 2 ft, Brad nails, 1-1/4" and 5/8", Wood glue
Attach the sides to the bottom with nails and glue, then attach the center panel, which reinforces the whole cart.
Tools: Brad Nailer. Materials: 1x12, 10 ft, 1x2, 4 ft, Brad nails, 1-1/4" and 5/8", Wood glue
Place the shelf on top and attach with nails and glue. Attach the top support piece, then the top, both with nails and glue.
Tools: Jigsaw, Random Orbit Sander. Materials: 1x8, 4 ft
Cut out the two espresso machine sides identically with a jigsaw and sand smooth.
Tools: Brad Nailer. Materials: 1x2, 4 ft, 1x8, 4 ft, Brad nails, 1-1/4" and 5/8", Wood glue
Attach the bottom, front, back, and top to the sides with 1-1/4" brad nails and glue.
Tools: Brad Nailer. Materials: 1x3, 2 ft, 1x4, 1 ft, Brad nails, 1-1/4" and 5/8", Wood glue
Attach the detail boards and small blocks to the front of the machine with brad nails and glue from all sides.
Tools: Drill / Driver, Miter Saw. Materials: 2" diameter dowel, 2 ft, 3/4" diameter dowel, 12 in, Wood glue
Cut and attach the espresso cup holder, handle, knobs, and steam wand from the dowel stock.
Tools: Random Orbit Sander. Materials: Primer and paint
Sand and paint the cart and espresso machine.