NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A caster-mounted A-frame tool rack faced in pegboard — rolls between rooms, garage bays, or job sites.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs 5° angle on both ends, parallel to each other. | 4 | 1 1/2" × 3 1/2" × 72" | 2x4 | ☐ |
| Top braces 5° angle on both ends, perpendicular to the legs. | 2 | 1 1/2" × 3 1/2" × 4 3/4" | 2x4 | ☐ |
| Base, long | 2 | 1 1/2" × 3 1/2" × 18" | 2x4 | ☐ |
| Base, short | 2 | 1 1/2" × 3 1/2" × 16 3/4" | 2x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Construction lumber, 2x4, 6 ft | 4 each | ☐ |
| Pegboard, 23-1/2" x 4 ft | 1 each | ☐ |
| Pegboard hooks and hardware | 1 set | ☐ |
| Swivel casters, 2" (2 fixed, 2 locking) The two locking casters matter — a loaded rack that can't be locked in place will roll while you're working off it. | 4 each | ☐ |
| Scrap plywood, 1/2" or 3/4" Optional shelves between the frames. | 4 sq ft | ☐ |
| Pocket hole screws, 2-1/2" | 20 each | ☐ |
| Wood screws, 2-1/2" | 20 each | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.