NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A kids' play market stand — a mirrored 1x3 leg frame with a 1x12 counter and a slatted, plywood-bottomed produce tray that slides in and screws to the legs.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Leg frame, long uprights | 2 | 3/4" × 2 1/2" × 48" | 1x3, 8 ft | ☐ |
| Leg frame, mid rails | 2 | 3/4" × 2 1/2" × 23 1/4" | 1x3, 8 ft | ☐ |
| Leg frame, short rails | 2 | 3/4" × 2 1/2" × 12 1/2" | 1x3, 8 ft | ☐ |
| Leg frame, 1x2 rails | 2 | 3/4" × 1 1/2" × 12 1/2" | 1x2, 8 ft | ☐ |
| Front rail, wide | 1 | 3/4" × 2 1/2" × 35" | 1x3, 8 ft | ☐ |
| Front rail, narrow | 1 | 3/4" × 1 1/2" × 35" | 1x2, 8 ft | ☐ |
| Sign brace | 1 | 3/4" × 1 1/2" × 32" | 1x2, 8 ft | ☐ |
| Counter top | 1 | 3/4" × 11 1/4" × 36" | 1x12, 3 ft | ☐ |
| Tray sides | 2 | 3/4" × 2 1/2" × 32" | 1x3, 8 ft | ☐ |
| Tray slats and dividers | 5 | 3/4" × 2 1/2" × 12" | 1x3, 8 ft | ☐ |
| Tray bottom | 1 | 1/4" × 13 1/2" × 32" | Scrap 1/4" plywood, 13-1/2" x 32" | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x3, 8 ft Cut the longest pieces first to get all the cuts from these boards. | 4 each | ☐ |
| 1x2, 8 ft | 1 each | ☐ |
| 1x12, 3 ft | 1 each | ☐ |
| Scrap 1/4" plywood, 13-1/2" x 32" | 1 each | ☐ |
| Self-tapping wood screws, 1-5/8" | 30 each | ☐ |
| Brad nails, 1-1/4" and 5/8" | 30 each | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver. Materials: 1x3, 8 ft, 1x2, 8 ft, Self-tapping wood screws, 1-5/8", Wood glue
Build two leg sets as true mirror images of each other, using the 1-5/8" self-tapping wood screws and glue.
Tools: Drill / Driver. Materials: 1x3, 8 ft, 1x2, 8 ft, Self-tapping wood screws, 1-5/8"
Add the horizontal front rail and sign brace to tie the two leg sets together, forming the full frame, with screws.
Tools: Brad Nailer, Drill / Driver. Materials: 1x12, 3 ft, Brad nails, 1-1/4" and 5/8", Wood glue
Place the 1x12 counter top on the frame and attach — nail (1-1/4") and glue, or screw down.
Tools: Brad Nailer, Drill / Driver. Materials: 1x3, 8 ft, Self-tapping wood screws, 1-5/8", Brad nails, 1-1/4" and 5/8", Wood glue
Build the tray sides and slats/dividers into a flat frame with screws or 1-1/4" brad nails and glue.
Tools: Brad Nailer. Materials: Scrap 1/4" plywood, 13-1/2" x 32", Brad nails, 1-1/4" and 5/8", Wood glue
Nail the plywood bottom to the tray with 5/8" brad nails and glue, also nailing into the center dividers.
Tools: Drill / Driver, Random Orbit Sander. Materials: Self-tapping wood screws, 1-5/8"
Position the tray inside the frame and attach to the legs with 1-5/8" screws. Sand and finish.