NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A modern leaf-shaped magazine rack and plant stand combo, cut from one oak plywood panel and standing on angled dowel legs.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Panel Cut to your chosen leaf or geometric shape using a template. | 1 | 3/4" × 16" × 24" | Oak plywood | ☐ |
| Legs | 4 | 1 1/4" × 1 1/4" × 32" | 1-1/4in dowel rod | ☐ |
| Short braces | 2 | 1" × 1" × 18" | 1in dowel rod | ☐ |
| Long brace | 1 | 3/4" × 3/4" × 32" | 3/4in dowel rod | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Oak plywood, 3/4", partial sheet | 1 sheet | ☐ |
| Dowel rod, 1-1/4", 32in (legs) | 4 each | ☐ |
| Dowel rod, 1", 18in (short braces) | 2 each | ☐ |
| Dowel rod, 3/4", 32in (long brace) | 1 each | ☐ |
| Pocket hole screws | 16 each | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Table Saw. Materials: Oak plywood, 3/4", partial sheet
Cut the plywood panel to your chosen leaf or panel shape using a template.
Tools: Drill / Driver, Forstner Bits. Materials: Oak plywood, 3/4", partial sheet
Drill angled holes with a forstner bit for the dowel legs, using an angled drill attachment for a consistent splayed stance.
Materials: Dowel rod, 1-1/4", 32in (legs), Dowel rod, 1", 18in (short braces), Dowel rod, 3/4", 32in (long brace)
Cut the dowel legs and the short and long cross braces to length.
Tools: Drill / Driver, Pocket Hole Jig. Materials: Pocket hole screws, Wood glue
Assemble the dowel legs into the panel using glue and pocket screws for the cross braces.
Sand and finish as desired.