NotchOutdoor Bench
Step-by-step build — 3 steps. Also available as a print sheet.
1Cut the 2x10s
Cut a 2x10 with the blade set at 15 degree angle.
2Cut the 2x4s
Set the blade on the circular saw back to 90 degrees and cut a 2x4 at a 15 degree angle.
3Assemble the bench
Use pocket holes to connect the pieces. I placed on the holes on the inside of the pieces so that they would be less visible. I screwed one of the 2x4 pieces first before adding a single leg. I then added another 2x4 piece and then the last leg. I used pocket holes to screw the 2x4s to both the legs and to the top of the bench. Use sealer to protect your bench.
