NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A 48" plywood vanity with doors flanking an open center shelf and two drawers. Real casework — carcass, face frame, doors, and inset drawers.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Carcass sides | 2 | 3/4" × 20 1/4" × 35" | 3/4" plywood | ☐ |
| Carcass bottom | 1 | 3/4" × 20 1/4" × 46 1/2" | 3/4" plywood | ☐ |
| Carcass fixed shelves | 2 | 3/4" × 20 1/4" × 31 1/2" | 3/4" plywood | ☐ |
| Center divider shelves | 2 | 3/4" × 20 1/4" × 12 1/2" | 3/4" plywood | ☐ |
| Middle adjustable shelf Cut down / notched for plumbing. | 1 | 3/4" × 20 1/4" × 20" | 3/4" plywood | ☐ |
| Center vertical dividers | 2 | 3/4" × 3 1/2" × 12 1/2" | 1x4 | ☐ |
| Center bottom rail | 1 | 3/4" × 3 1/2" × 20" | 1x4 | ☐ |
| Back supports | 2 | 3/4" × 1 1/2" × 20 1/4" | 1x2 | ☐ |
| Face frame stiles | 2 | 3/4" × 1 1/2" × 35" | 1x2 | ☐ |
| Face frame top/bottom rails | 2 | 3/4" × 1 1/2" × 45" | 1x2 | ☐ |
| Face frame center short rails | 2 | 3/4" × 1 1/2" × 5 3/4" | 1x2 | ☐ |
| Face frame center stiles | 2 | 3/4" × 1 1/2" × 22 3/4" | 1x2 | ☐ |
| Face frame drawer rail | 1 | 3/4" × 3 1/2" × 45" | 1x4 | ☐ |
| Drawer box front/back | 2 | 3/4" × 5 1/2" × 5 1/2" | 1x6 | ☐ |
| Drawer box back long | 1 | 3/4" × 5 1/2" × 18 1/4" | 1x6 | ☐ |
| Door frame stiles 1/2"-thick door frame members; cut from 1x3 ripped down if needed. | 4 | 3/4" × 2 1/2" × 16" | 1x3 | ☐ |
| Door frame rails | 4 | 3/4" × 2 1/2" × 9 3/4" | 1x3 | ☐ |
| Door center panels | 2 | 1/2" × 10 3/4" × 16" | 1/2" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood Carcass. Ripped into 20-1/4" wide strips. Birch or maple ply finishes better than sheathing ply. | 1 sheet | ☐ |
| 1/2" plywood A quarter sheet for the door center panels; you'll use a fraction of it. | 1 sheet | ☐ |
| 1/4" plywood A quarter sheet for the drawer bottoms. | 1 sheet | ☐ |
| 1x4, 8 ft (Pine / Hardwood) Carcass nailers and face frame. | 1 each | ☐ |
| 1x2, 8 ft (Pine / Hardwood) Face frame stiles and rails. | 3 each | ☐ |
| 1x6, 4 ft (Pine / Hardwood) Drawer box front/back. | 1 each | ☐ |
| 1x3, 12 ft (Pine / Hardwood) Door frames. | 1 each | ☐ |
| 1/2" x 3-1/2" boards Drawer box sides. Any 1/2" stock ripped to 3-1/2". | 9 linear ft | ☐ |
| Non-mortise hinges | 4 each | ☐ |
| 16" euro drawer slides | 2 pair | ☐ |
| Pocket hole screws, 1" and 1-1/4" | 1 box | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 8 oz | ☐ |
| Knobs and pulls | 4 each | ☐ |
| Wood filler and finish |
| 1 kit |
| ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.