NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A slim 2x2-leg end table sized for tight spaces, with a euro-slide drawer built into a pocket-holed box — square joints matter more here than usual since a racked box means a drawer that won't fit.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top | 1 | 3/4" × 9 1/4" × 24" | 1x10, 8 ft | ☐ |
| Top trim | 2 | 3/4" × 2 1/2" × 24" | 1x3, 4 ft | ☐ |
| Sides | 2 | 3/4" × 9 1/4" × 19" | 1x10, 8 ft | ☐ |
| End apron (back) Cut to the actual width of your 1x10s. | 1 | 3/4" × 9 1/4" × 9 1/4" | 1x10, 8 ft | ☐ |
| Front aprons Cut to the actual width of your 1x10s. | 2 | 3/4" × 1 1/2" × 9 1/4" | 1x2, 2 ft | ☐ |
| Legs | 4 | 1 1/2" × 1 1/2" × 24" | 2x2, 8 ft | ☐ |
| Top support blocking (no pocket jig) | 3 | 1 1/2" × 1 1/2" × 9 1/4" | 2x2, 8 ft | ☐ |
| Drawer box sides | 2 | 1/4" × 5" × 16" | 1/4" plywood, quarter sheet (drawer box) | ☐ |
| Drawer box front/back | 2 | 1/4" × 5" × 8 3/4" | 1/4" plywood, quarter sheet (drawer box) | ☐ |
| Drawer bottom | 1 | 1/4" × 8 3/4" × 16" | 1/4" plywood, quarter sheet (drawer box) | ☐ |
| Drawer face | 1 | 3/4" × 5" × 9" | 1x4, 4 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x2, 8 ft | 1 each | ☐ |
| 1x10, 8 ft | 1 each | ☐ |
| 1x4, 4 ft | 1 each | ☐ |
| 1x3, 4 ft | 1 each | ☐ |
| 1x2, 2 ft | 1 each | ☐ |
| 1/4" plywood, quarter sheet (drawer box) | 1 each | ☐ |
| Pocket hole screws, 1-1/4" and 2-1/2" | 40 each | ☐ |
| Self-tapping wood screws, 2-1/2" | 12 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Drawer slides, 16 in, pair | 1 set | ☐ |
| Knob or handle | 1 each | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.