NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A six-foot entry bench with three real drawers on full-extension slides — 2x4 frames wrapped in plywood, with a face frame that makes it read as cabinetry.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Frame rails | 4 | 1 1/2" × 3 1/2" × 70 1/2" | — | ☐ |
| Frame uprights | 8 | 1 1/2" × 3 1/2" × 14 1/4" | — | ☐ |
| Side panels | 2 | 3/4" × 17 1/4" × 23 7/8" | Plywood | ☐ |
| Top | 1 | 3/4" × 23 7/8" × 72" | Plywood | ☐ |
| Drawer fronts/backs CUT TO FIT your slides and openings — listed sizes assume 1/2"-clearance slides. | 6 | 3/4" × 9 1/4" × 19" | 1x10 | ☐ |
| Drawer sides Cut to fit — match your slide length. | 6 | 3/4" × 9 1/4" × 23 7/8" | 1x10 | ☐ |
| Drawer bottoms Cut to fit. | 3 | 1/4" × 20 1/2" × 23 7/8" | 1/4" plywood | ☐ |
| Face frame top rail | 1 | 3/4" × 1 1/2" × 72" | 1x2 | ☐ |
| Face frame bottom rail | 1 | 3/4" × 3 1/2" × 72" | 1x4 | ☐ |
| Face frame stiles | 4 | 3/4" × 1 1/2" × 13" | 1x2 | ☐ |
| Drawer face frame rails Approximate — sized to an even 1/8" reveal. | 6 | 3/4" × 2 1/2" × 12 3/4" | 1x3 | ☐ |
| Drawer face frame stiles, end drawers Approximate. | 4 | 3/4" × 2 1/2" × 17" | 1x3 | ☐ |
| Drawer face frame stiles, middle drawer Approximate. | 2 | 3/4" × 2 1/2" × 16 1/4" | 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" cabinet grade, 4x8 sheet Ripped into two 96" x 23-7/8" strips — sides and top. | 1 each | ☐ |
| 2x4, 8 ft The two frames and the slide spacers. | 5 each | ☐ |
| 1x10, 8 ft Drawer boxes. | 3 each | ☐ |
| Plywood, 1/4", 48" x 48" Drawer bottoms. | 1 each | ☐ |
| 1x2, 8 ft Face frame — 12 ft needed. | 2 each | ☐ |
| 1x4, 6 ft Face frame bottom rail. | 1 each | ☐ |
| 1x3, 8 ft Drawer face frames. | 2 each | ☐ |
| Full-extension side-mount drawer slides Buy FIRST and read their instructions — the drawer boxes are built to the slides, not to the plan. | 3 each | ☐ |
| Knobs or handles | 3 each | ☐ |
| Screws, #10 x 3", self-tapping | 40 each | ☐ |
| Pocket hole screws, 1-1/4" | 40 each | ☐ |
| Brad nails, 1-1/4" and 3/4", 18 ga | 150 each | ☐ |
| Wood glue | 8 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.