NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A narrow open-shelf cabinet from one ripped sheet of plywood, trimmed front and side to hide the raw edges — one module in a mix-and-match office system.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top | 1 | 3/4" × 15 1/2" × 19 1/2" | 3/4" plywood | ☐ |
| Sides | 2 | 3/4" × 15 1/2" × 29" | 3/4" plywood | ☐ |
| Shelves | 2 | 3/4" × 15 1/2" × 18" | 3/4" plywood | ☐ |
| Back | 1 | 1/4" × 19 1/2" × 29 3/4" | 1/4" plywood | ☐ |
| Top inside trim | 1 | 3/4" × 1 1/2" × 18" | 1x2 | ☐ |
| Bottom inside trim | 1 | 3/4" × 2 1/2" × 18" | 1x3 | ☐ |
| Top side trim | 2 | 3/4" × 1 1/2" × 15 1/2" | 1x2 | ☐ |
| Bottom side trim | 2 | 3/4" × 2 1/2" × 15 1/2" | 1x3 | ☐ |
| Top front trim | 1 | 3/4" × 1 1/2" × 21" | 1x2 | ☐ |
| Bottom front trim | 1 | 3/4" × 2 1/2" × 21" | 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood or MDF, 4x8 sheet Rip into 15-1/2" strips; scraps feed other modules in the collection. | 1 each | ☐ |
| 1/4" plywood or MDF, back piece Only a 31" x 21" piece needed. | 1 each | ☐ |
| 1x2 board, 8 ft (Pine) | 1 each | ☐ |
| 1x3 board, 8 ft (Pine) | 1 each | ☐ |
| Edge banding Front plywood edges; skip if using MDF. | 12 ft | ☐ |
| Pocket-hole screws, 1-1/4" | 30 each | ☐ |
| Finish nails, 1-1/4" and 2" | 40 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.