Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Modular Miter Station – Phase 4 – Dust Hood
Every woodworkers nemesis is sawdust and this miter saw dust hood will help cut that down.
- Difficulty
- Easy
- Time
- 3–5.5 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 17" × 20" | — | ☐ |
| Top & Back | 2 | 3/4" × 16" × 42" | — | ☐ |
| Angle Back Piece | 1 | 1/4" × 7" × 43" | — | ☐ |
| Front Trim | 1 | 3/4" × 1" × 43" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| Plywood, 1/4" Thick Scrap Piece 43 1/2"L x 7.5"W | 1 board | ☐ |
| Box of 1 1/4" coarse pocket holes screws | 1 each | ☐ |
| 18 ga brad nails | 1 each | ☐ |
| Dust Collector Bag or Heavy Plastic | 1 each | ☐ |
| Tube of painter's caulk | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.