NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Wall-hung 1x12 closet towers on a single level cleat — build shelf and hanging components on the bench, then hook them on the wall like cabinets. No feet on the floor.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides 3-shelf tower. Variants: 18-1/4" (1 shelf), 31" (2), 64-1/2" (5), 43-3/4" double-hanging. | 2 | 3/4" × 11 1/4" × 43 3/4" | 1x12 | ☐ |
| Shelves Always the component width minus 1-1/2" — here 36" wide. Shelf count is variant + 1 (top and bottom count). | 4 | 3/4" × 11 1/4" × 34 1/2" | 1x12 | ☐ |
| Backers, top and bottom The top backer doubles as the hanging rail sitting on the cleat. | 2 | 3/4" × 5 1/2" × 36" | 1x6 | ☐ |
| Wall cleat Full closet length — cut to your wall, 96" shown for an 8-ft closet. | 1 | 3/4" × 2 1/2" × 96" | 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12 finger-jointed pine, 8 ft One 3-shelf 36" tower: sides and shelves. Finger-jointed stock is straight and takes paint well. | 3 each | ☐ |
| 1x6, 8 ft Top and bottom backers — two times the closet's overall length when building multiple components. | 2 each | ☐ |
| 1x3, 8 ft The wall cleat, full length of the closet. | 1 each | ☐ |
| Wood construction screws, 3", self-tapping, star drive Cleat and backers into studs. Every one of these goes into framing, not drywall. | 20 each | ☐ |
| Pocket hole screws, 1-1/4" | 50 each | ☐ |
| Trim screws, 1-5/8" Backers to the component. | 30 each | ☐ |
| Closet rod sockets, pair | 1 each | ☐ |
| Wood dowel, 1-1/4", 4 ft The closet rod — cut to fit between components or sides. | 1 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Paint or stain and sandpaper | 1 qt | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.