NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A tall, narrow-drawer dresser built mostly from ripped plywood strips and 1x trim, with five drawers and beveled shadow-gap faces.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Front inner trim | 5 | 3/4" × 2 1/2" × 21" | 1x3 | ☐ |
| Drawer slide supports | 4 | 3/4" × 2 1/2" × 50 3/4" | 1x3 | ☐ |
| Side panels | 2 | 3/4" × 16" × 50" | 3/4" plywood | ☐ |
| Bottom trim | 4 | 3/4" × 1 1/2" × 24" | 1x2 | ☐ |
| Bottom side trim | 2 | 3/4" × 1 1/2" × 16" | 1x2 | ☐ |
| Top panel | 1 | 3/4" × 16" × 22 1/2" | 3/4" plywood | ☐ |
| Front/back trim | 4 | 3/4" × 1 1/2" × 48 1/2" | 1x2 | ☐ |
| Drawer box sides | 10 | 3/4" × 5 1/2" × 16" | 1x6 | ☐ |
| Drawer box front/back | 10 | 3/4" × 5 1/2" × 18 1/2" | 1x6 | ☐ |
| Drawer faces Ripped to 8-1/2in wide with an inside 45-degree bevel on the top edge. | 5 | 3/4" × 8 1/2" × 20 3/4" | 1x10, ripped | ☐ |
| Drawer bottoms | 5 | 1/4" × 16" × 20" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine board, 1x2, 8 ft | 4 each | ☐ |
| Pine board, 1x3, 8 ft | 4 each | ☐ |
| Pine board, 1x6, 8 ft | 2 each | ☐ |
| Pine board, 1x10, 10 ft | 1 each | ☐ |
| 3/4" plywood, 4x8 sheet Ripped into 16in wide strips for the sides and top. | 1 each | ☐ |
| 1/4" plywood, half sheet (4x4 ft) Ripped into 16in wide strips for drawer bottoms. | 1 each | ☐ |
| Euro-style drawer slides, 16" | 5 pair | ☐ |
| Brad nails, assorted | 1 box | ☐ |
| Wood screws, 1-1/4" Reinforces the drawer faces from behind. | 20 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.