NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small splay-legged kids' chair with compound-angle legs and a jigsaw-cut thumb hole in the seat back.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs Long point to short point; ends parallel; 10° miter combined with a 5° bevel. | 4 | 3/4" × 2 1/2" × 13 1/2" | 1x3 | ☐ |
| Side aprons Long point to long point; both ends cut at a 10° miter. | 2 | 3/4" × 2 1/2" × 7" | 1x3 | ☐ |
| Front and back aprons Short point to short point; both ends cut at a 5° miter. | 2 | 3/4" × 2 1/2" × 12 1/2" | 1x3 | ☐ |
| Seat | 1 | 3/4" × 11 1/4" × 14" | 1x12 | ☐ |
| Seat back One end cut at a 10° bevel. | 1 | 3/4" × 11 1/4" × 6" | 1x12 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12 board, 2 ft (Pine) | 1 each | ☐ |
| 1x3 board, 10 ft (Pine) | 1 each | ☐ |
| Pocket-hole screws, 1-1/4" | 20 each | ☐ |
| Wood screws, 1-1/4" | 10 each | ☐ |
| Wood glue | 3 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.