NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A 48" round top on three angled 4x4 truss legs, joined with mending plates instead of hidden joinery — the hardware is part of the look.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top leg pieces Long point measurement, one end cut at 25° off square. | 6 | 1 1/2" × 3 1/2" × 22 1/2" | 2x4 | ☐ |
| Main leg pieces Long point to short point, both ends cut at 25° off square, ends ARE parallel. | 3 | 3 1/2" × 3 1/2" × 29 3/4" | 4x4 | ☐ |
| Leg foot pieces Longest point measurement, one end cut at 25° off square, the other at 40° off square. | 3 | 3 1/2" × 3 1/2" × 17 1/8" | 4x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4 board, 8 ft (Pine) | 1 each | ☐ |
| 4x4 board, 8 ft (Pine) Or substitute doubled-up 2x4s, pocket-screwed together first. | 2 each | ☐ |
| Mending plates | 6 each | ☐ |
| 3/4" plywood, 48" round tabletop Cut your own round top from a full sheet, or buy a pre-cut round blank. | 1 each | ☐ |
| Self-tapping wood screws, 2-1/2" and 3" | 24 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.