NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A truss-style leaning bookshelf on 2x4 legs canted at 10°. The angled legs do all the styling; the joinery is just screws.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs Ends cut 10° off square, parallel to each other. | 4 | 1 1/2" × 3 1/2" × 66" | 2x4 | ☐ |
| Shelf supports Cut to match your actual shelf width (11-1/4" for nominal, 12" for full). | 8 | 1 1/2" × 3 1/2" × 11 1/2" | 2x4 | ☐ |
| Shelves Cut to fit between the legs; keep spans under ~36". | 4 | 3/4" × 11 1/4" × 47 1/4" | 1x12 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft (Whitewood/SPF) Legs and shelf supports. | 4 each | ☐ |
| 1x12 board or 12"-wide shelving, 8 ft (Pine) Shelves — measure actual width before cutting supports. | 2 each | ☐ |
| Self-tapping wood screws, 3" | 16 each | ☐ |
| Self-tapping wood screws, 2" | 24 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.