NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A plank-top dining table built entirely from 1x6 and 1x8 boards with mitered 1x3 apron trim — no thick 2x lumber anywhere, and a genuine humidity-acclimation step before assembly.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Tabletop boards | 8 | 3/4" × 5 1/2" × 77" | 1x6, 10 ft, kiln dried | ☐ |
| Legs, 1x6 half | 8 | 3/4" × 5 1/2" × 29 1/4" | 1x6, 10 ft, kiln dried | ☐ |
| Legs, 1x8 half | 8 | 3/4" × 7 1/4" × 29 1/2" | 1x8, 10 ft, kiln dried | ☐ |
| Apron sides Longest point, both ends cut 45° bevel, ends not parallel. | 2 | 3/4" × 2 1/2" × 76" | 1x3, 8 ft | ☐ |
| Apron ends Longest point, both ends cut 45° bevel, ends not parallel. Measure and cut to fit. | 2 | 3/4" × 2 1/2" × 43 1/2" | 1x3, 8 ft | ☐ |
| Inner supports | 2 | 3/4" × 2 1/2" × 74 1/2" | 1x3, 8 ft | ☐ |
| Leg supports Cut to 6" wider than assembled leg width. | 4 | 3/4" × 2 1/2" × 14" | 1x3, 8 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x6, 10 ft, kiln dried | 8 each | ☐ |
| 1x8, 10 ft, kiln dried | 2 each | ☐ |
| 1x3, 8 ft | 5 each | ☐ |
| Pocket hole screws, 1-1/4" | 125 each | ☐ |
| Brad nails, 1-1/4" | 30 each | ☐ |
| Wood glue | 5 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.