NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A rolling 2x4-frame cart with plywood-floored vertical bins for storing full sheets on edge, plus a flat top shelf and angled scrap-wood bins.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Base long rails | 2 | 1 1/2" × 3 1/2" × 96" | Pine 2x4 | ☐ |
| Base cross members | 5 | 1 1/2" × 3 1/2" × 45" | Pine 2x4 | ☐ |
| Wall verticals | 10 | 1 1/2" × 3 1/2" × 60" | Pine 2x4 | ☐ |
| Wall top/bottom rails | 4 | 1 1/2" × 3 1/2" × 96" | Pine 2x4 | ☐ |
| Floor panels, wide | 2 | 1/2" × 14 1/2" × 96" | Plywood | ☐ |
| Floor panel, narrow | 1 | 1/2" × 12" × 96" | Plywood | ☐ |
| Cross supports Both ends cut at 45°, not parallel, long point to long point measurement. | 4 | 3/4" × 3 1/2" × 25 1/2" | Pine 1x4 | ☐ |
| Top panel | 1 | 1/2" × 19" × 96" | Plywood | ☐ |
| Top trim, long | 2 | 3/4" × 3 1/2" × 96" | Pine 1x4 | ☐ |
| Top trim, short | 2 | 3/4" × 3 1/2" × 20 1/2" | Pine 1x4 | ☐ |
| Scrap bin strip, wide | 1 | 1/2" × 36" × 96" | Plywood | ☐ |
| Scrap bin strip, narrow | 1 | 1/2" × 12" × 96" | Plywood | ☐ |
| Scrap bin sides/dividers Tapered to 12" on one side at a 45° angle. | 4 | 3/4" × 13" × 25" | Plywood or 1x material | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 2x4, 8 ft | 11 each | ☐ |
| Pine, 2x4, 10 ft 60" wall pieces cut from these. | 5 each | ☐ |
| Pine, 1x4, 8 ft | 4 each | ☐ |
| Plywood, 1/2", 4x8 sheet | 2 each | ☐ |
| Plywood or 1x material, 3/4", 4x8 sheet Scrap wood bins and top shelf. | 1 each | ☐ |
| Wood screws, 2-1/2" | 1 box | ☐ |
| Wood screws, 1-1/2" | 1 box | ☐ |
| Heavy-duty caster wheels | 4 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.