NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
An open two-shelf console with jigsaw-curved end panels — cut the first curve carefully, then trace it as the template for the second.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Curved fronts Draw and cut the first freehand, then trace it as the template for the second. | 2 | 3/4" × 9 1/4" × 6" | 1x10 | ☐ |
| Back legs | 2 | 3/4" × 1 1/2" × 33" | 1x2 | ☐ |
| Front legs | 2 | 3/4" × 1 1/2" × 25" | 1x2 | ☐ |
| Sides | 4 | 3/4" × 1 1/2" × 12" | 1x2 | ☐ |
| Top sides | 2 | 3/4" × 1 1/2" × 6" | 1x2 | ☐ |
| Front/top supports | 4 | 3/4" × 1 1/2" × 36 1/2" | 1x2 | ☐ |
| Top | 1 | 3/4" × 9 1/4" × 39" | 1x10 | ☐ |
| Shelf backs | 2 | 3/4" × 9 1/4" × 35" | 1x10 | ☐ |
| Shelf sides Triangular; adjust the bottom edge to match your actual 1x12 width before cutting. | 2 | 3/4" × 9 1/2" × 11 1/2" | 1x10 | ☐ |
| Shelf bottoms | 2 | 3/4" × 11 1/4" × 36 1/2" | 1x12 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12 board, 8 ft (Pine) | 1 each | ☐ |
| 1x10 board, 8 ft (Pine) | 2 each | ☐ |
| 1x2 board, 8 ft (Pine) | 4 each | ☐ |
| Self-tapping wood screws, 1-1/4" (or pocket-hole screws) | 40 each | ☐ |
| Trim screws, 2-5/8" | 20 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Wood filler and finishing supplies | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.