NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A kids' lemonade stand with a tall signboard back, a 2x4 frame, cedar-picket paneling on all sides, and an inside shelf for cups and pitchers.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Back legs Adjust to match your desired signage height. | 2 | 1 1/2" × 3 1/2" × 60" | 2x4, 12 ft (or 3 @ 8 ft or stud length) | ☐ |
| Front legs Adjust to match your desired tabletop height. | 2 | 1 1/2" × 3 1/2" × 24" | 2x4, 12 ft (or 3 @ 8 ft or stud length) | ☐ |
| Inner supports | 4 | 1 1/2" × 3 1/2" × 14 1/2" | 2x4, 12 ft (or 3 @ 8 ft or stud length) | ☐ |
| Side panels | 6 | 5/8" × 5 1/2" × 17 1/2" | Cedar fence pickets, 5-1/2" wide, 72" long | ☐ |
| Front, top, and sign panels | 7 | 5/8" × 5 1/2" × 35" | Cedar fence pickets, 5-1/2" wide, 72" long | ☐ |
| Inside shelf Measure and cut to fit the actual assembled frame. | 2 | 5/8" × 5 1/2" × 34" | Cedar fence pickets, 5-1/2" wide, 72" long | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 12 ft (or 3 @ 8 ft or stud length) | 2 each | ☐ |
| Cedar fence pickets, 5-1/2" wide, 72" long | 6 each | ☐ |
| Self-tapping star bit screws, 2-1/2" | 16 each | ☐ |
| Self-tapping star bit screws, 1-1/2" | 60 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver. Materials: 2x4, 12 ft (or 3 @ 8 ft or stud length), Self-tapping star bit screws, 2-1/2"
Build the back frame (tall legs) and front frame (short legs) with the inner supports, using the longer 2-1/2" screws.
Tools: Drill / Driver. Materials: Cedar fence pickets, 5-1/2" wide, 72" long, Self-tapping star bit screws, 1-1/2"
Attach the side cedar picket panels to the frames, as mirror images of each other, with the shorter screws.
Materials: Cedar fence pickets, 5-1/2" wide, 72" long
Place the center front panel piece in the center of the front opening, with even gaps on either side.
Tools: Drill / Driver. Materials: Cedar fence pickets, 5-1/2" wide, 72" long, Self-tapping star bit screws, 1-1/2"
On a flat, level surface, add the remaining front panel pieces, checking that the base still sits flat as you go. Attach with the shorter screws.
Tools: Drill / Driver. Materials: Cedar fence pickets, 5-1/2" wide, 72" long
Add the top panel and the sign board panel.
Tools: Drill / Driver, Random Orbit Sander, Tape Measure. Materials: Cedar fence pickets, 5-1/2" wide, 72" long, Self-tapping star bit screws, 1-1/2"
Measure and cut the inside shelf pieces to fit the actual assembled frame, and attach with the shorter screws. An optional drink-dispenser riser can be added later, left unattached so it can be repositioned as needed. Sand and finish.