Lemonade Stand — Cedar Fence Pickets and 2x4s

Build the back frame (tall legs) and front frame (short legs) with the inner supports, using the longer 2-1/2" screws.

Attach the side cedar picket panels to the frames, as mirror images of each other, with the shorter screws.

Place the center front panel piece in the center of the front opening, with even gaps on either side.

On a flat, level surface, add the remaining front panel pieces, checking that the base still sits flat as you go. Attach with the shorter screws.

Add the top panel and the sign board panel.

Measure and cut the inside shelf pieces to fit the actual assembled frame, and attach with the shorter screws. An optional drink-dispenser riser can be added later, left unattached so it can be repositioned as needed. Sand and finish.