Homestead End Table

Cut the tabletop, leg, and shelf pieces per the cut list, paying close attention to which angled pieces need parallel ends and which don't. Dry-fit one leg assembly before cutting the rest.

Lay out the tabletop boards and center the angled cleats across the underside, leaving a consistent 1in overhang at each end. Attach with screws and glue.

Build two leg assemblies from the angled leg pieces, joining them with pocket holes to keep the fasteners hidden.

Attach the leg assemblies to the underside of the tabletop cleats.

Clamp the bottom shelf boards in place between the legs and fasten from underneath with screws and glue.

Sand every surface, then finish with stain to match the rest of the Homestead Collection.