NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A face-framed locker cabinet with a bank of build-to-fit drawers and a charging cubby wired through a drilled back panel.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 11 1/4" × 75 1/4" | 1x12 | ☐ |
| Main divider Splits the cabinet into the locker side and the drawer cubby side. | 1 | 3/4" × 11 1/4" × 75 1/4" | 1x12 | ☐ |
| Top and bottom | 4 | 3/4" × 11 1/4" × 25 1/2" | 1x12 | ☐ |
| Cubby dividers Measure your 1x8 boards' actual width and cut these to that width plus 1/4" for drawer allowance. | 4 | 3/4" × 11 1/4" × 7 1/2" | 1x12 | ☐ |
| Fixed shelf | 1 | 3/4" × 11 1/4" × 36 1/4" | 1x12 | ☐ |
| Bottom shelf | 1 | 3/4" × 11 1/4" × 27" | 1x12 | ☐ |
| Back panel | 1 | 1/4" × 27" × 76" | 1/4" plywood | ☐ |
| Frame side stiles | 2 | 3/4" × 1 1/2" × 73 3/4" | 1x2 | ☐ |
| Frame top and bottom rails | 2 | 3/4" × 1 1/2" × 27" | 1x2 | ☐ |
| Frame center rail | 1 | 3/4" × 1 1/2" × 24" | 1x2 | ☐ |
| Drawer sides Cut to fit — treat this as a starting size and trim each drawer to its own opening. | 6 | 3/4" × 5 1/2" × 10 1/2" | 1x6 | ☐ |
| Drawer fronts and backs Cut to fit. | 3 | 3/4" × 5 1/2" × 5 3/4" | 1x6 | ☐ |
| Drawer faces Height matches your actual 1x8 board width — cut to fit each opening. | 3 | 3/4" × 7 1/4" × 7 1/4" | 1x8 | ☐ |
| Drawer bottoms | 3 | 1/4" × 10 1/2" × 7 1/4" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12 board, 8 ft (Pine) | 3 each | ☐ |
| 1x12 board, 10 ft (Pine) | 1 each | ☐ |
| 1x8 board, 2 ft (Pine) | 1 each | ☐ |
| 1x6 board, 8 ft (Pine) | 1 each | ☐ |
| 1/4" plywood, full sheet | 1 each | ☐ |
| 1x2 board, 8 ft (Pine) | 3 each | ☐ |
| Cabinet knobs | 3 each | ☐ |
| Pocket-hole screws, 1-1/4" | 30 each | ☐ |
| Finish nails, 1-1/4" | 80 each | ☐ |
| Wood glue | 6 oz | ☐ |
| Coat hooks | 3 each | ☐ |
| Wall anchors or lag screws (to secure to a stud) | 2 each | ☐ |
| Candle wax Rubbed on drawer bottoms after finishing for a smooth slide. | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.