NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wooden toddler high chair built from 2x2s with a solid seat and backrest. A few 10° angle cuts give the legs their splay and stability.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Back leg feet One end 10° off square, shortest point. | 2 | 1 1/2" × 1 1/2" × 8 1/4" | 2x2 | ☐ |
| Back leg mids One end 10° off square, shortest point. | 2 | 1 1/2" × 1 1/2" × 10 1/16" | 2x2 | ☐ |
| Back legs Both ends 10° off square, parallel to each other. | 2 | 1 1/2" × 1 1/2" × 21 5/16" | 2x2 | ☐ |
| Front legs | 2 | 1 1/2" × 1 1/2" × 21" | 2x2 | ☐ |
| Front support/apron | 2 | 1 1/2" × 1 1/2" × 12" | 2x2 | ☐ |
| Seat | 1 | 3/4" × 11 1/4" × 15" | 1x12 | ☐ |
| Back supports | 2 | 1 1/2" × 1 1/2" × 19" | 2x2 | ☐ |
| Back base | 1 | 1 1/2" × 1 1/2" × 9" | 2x2 | ☐ |
| Backrest | 1 | 3/4" × 5 1/2" × 15" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x2 board, 8 ft (Pine) Legs, aprons, supports. | 2 each | ☐ |
| 1x12 board, 15" (Pine) Seat. | 1 each | ☐ |
| 1x6 board, 15" (Pine) Backrest. | 1 each | ☐ |
| Pocket-hole and wood screws, 2" and 2-1/2" | 40 each | ☐ |
| Wood glue | 3 oz | ☐ |
| Child-safe finish A child eats at this chair — use a food-safe or non-toxic finish. | 8 oz | ☐ |
| Safety strap / harness Not woodworking, but required — a high chair needs a restraint. | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.