NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A toolbox-shaped caddy that holds wrapping-paper rolls on dowel spindles, with pegboard sides for scissors, tape, and ribbon. A ten-minute-assembly weekend build.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Ends Round the top corners; drill a 3/4" handle hole in the center of each. | 2 | 3/4" × 7 1/4" × 14" | 1x8 | ☐ |
| Bottom Sized for 32" wrapping-paper rolls; add 1x8 @ 7" dividers if desired. | 1 | 3/4" × 7 1/4" × 33" | 1x8 | ☐ |
| Handle | 1 | 3/4" × 3/4" × 34 1/2" | 3/4 in dowel | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x8, 6 ft Ends and bottom. | 1 each | ☐ |
| Pegboard, small piece Sides. | 1 each | ☐ |
| Wood dowel, 3/4 in, 36 in Handle plus paper-roll spindles. | 2 each | ☐ |
| Pegboard hooks | 1 set | ☐ |
| Wood screws, 2 in | 1 box | ☐ |
| Wood glue | 1 bottle | ☐ |
| Finish Optional. | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.