NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small hinged jewelry box built from scrap-friendly 1x4 and 1x6 offcuts, with an even overhanging lid.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Front and back | 2 | 3/4" × 3 1/2" × 7 1/4" | 1x4 | ☐ |
| Sides | 2 | 3/4" × 3 1/2" × 3 1/2" | 1x4 | ☐ |
| Top and bottom | 2 | 3/4" × 5 1/2" × 8 1/4" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x4 board, 2 ft (scrap works fine) (Pine) | 1 each | ☐ |
| 1x6 board, 2 ft (scrap works fine) (Pine) | 1 each | ☐ |
| Finish nails, 1-1/4" | 20 each | ☐ |
| Wood glue | 1 oz | ☐ |
| Flat hinges, pair H-style flat hinges shown; any flat hinge no wider than 1-1/2" and no longer than 3-1/2" works. | 1 pair | ☐ |
| Wood filler Matching or stainable filler, to suit your finish. | 1 each | ☐ |
| Finish of choice | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.