Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
How To Build Garage Shelves – DIY Garage Storage Shelves
I built these shelves to create some heavy-duty storage in my garage.
- Difficulty
- Intermediate
- Time
- 2.5–4.8 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 6 | 1" × 2" × 72" | — | ☐ |
| Short Rails | 12 | 1" × 2" × 18" | — | ☐ |
| Long Rails | 16 | 1" × 2" × 45" | — | ☐ |
| Shelves | 4 | 1" × 23" × 96" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x3 96" | 16 board | ☐ |
| Plywood, 1/2" Thick Full Sheet | 2 board | ☐ |
| 2 1/2" coarse thread pocket screws | 120 each | ☐ |
| 1" coarse thread pocket hole screws | 28 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.