NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A curved, single-guitar stand that pivots on a dowel rod and folds flat for travel or storage.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Stand halves Trace and cut the curved profile from this blank. | 2 | 3/4" × 9 1/2" × 36" | 1x10, joined to width | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine or hardwood board, 1x10, 36in | 2 each | ☐ |
| Dowel rod, 3/4", 6in cut | 1 each | ☐ |
| Latch piece stock, 1in x 1/4in x 12in | 1 each | ☐ |
| Wood screws, assorted | 6 each | ☐ |
| Felt strip tape | 1 roll | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.