NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small open-sided cedar caddy with drilled holes that hold mason jars or small vases upright — built in a 3-jar or single-jar version from the same fence picket.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top (3-vase holder) Hole centers marked at 4", 7-1/2", and 11". | 1 | 3/4" × 5 1/2" × 15" | Cedar fence picket | ☐ |
| Bottom (3-vase holder) | 1 | 3/4" × 5 1/2" × 14" | Cedar fence picket | ☐ |
| Sides (3-vase holder) Adjust to your jar or vase height. | 2 | 3/4" × 5 1/2" × 8" | Cedar fence picket | ☐ |
| Top (single-vase holder) Hole marked in the center. | 1 | 3/4" × 5 1/2" × 7" | Cedar fence picket | ☐ |
| Bottom (single-vase holder) | 1 | 3/4" × 5 1/2" × 6" | Cedar fence picket | ☐ |
| Sides (single-vase holder) | 2 | 3/4" × 5 1/2" × 8" | Cedar fence picket | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Cedar fence picket, 6 ft | 1 each | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 1 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Drill Bit Set. Materials: Cedar fence picket, 6 ft
Drill holes in the top board using a Forstner bit sized to your actual jar or vase diameter — for the 3-vase version, center the holes at 4", 7-1/2", and 11" along the board.
Tools: Brad Nailer. Materials: Cedar fence picket, 6 ft
Attach the top to the two sides using brad nails and glue.
Tools: Brad Nailer. Materials: Cedar fence picket, 6 ft
Attach the bottom to the two sides using brad nails and glue — flush to the ground, or raised on thin spacers if you want a slightly lifted look.