NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A padded, fabric-wrapped headboard on a 2x4 frame — batting and fabric stapled around the back, sized here for a queen bed with the same construction scaling to any width.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Frame, top and bottom Up to 96" for a wider headboard — the outside frame dimension is the finished headboard size. | 2 | 1 1/2" × 3 1/2" × 60" | 2x4, 8 ft | ☐ |
| Frame, sides Desired height minus 3" — up to 45" for a 48"-tall headboard. | 4 | 1 1/2" × 3 1/2" × 45" | 2x4, 8 ft | ☐ |
| Attachment cleats Cut to size and positioned to match your specific bed frame or footboard. | 2 | 1 1/2" × 3 1/2" × 12" | 2x4, 8 ft | ☐ |
| Cover panel Cut to match the frame's outside dimensions. | 1 | 1/4" × 60" × 48" | 1/4" plywood or wood paneling | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft Sized here for a queen (60" wide, 48" tall) headboard frame. | 4 each | ☐ |
| 1/4" plywood or wood paneling | 1 each | ☐ |
| Self-tapping screws, 2-3/4" | 20 each | ☐ |
| Screws, brad nails, or staples, 1-1/4" | 40 each | ☐ |
| Wood glue (if using nails or staples) | 2 oz | ☐ |
| Batting or old comforters | 1 each | ☐ |
| Upholstery fabric, 54" width | 3 yd | ☐ |
| Staples | 1 box | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Tape Measure. Materials: 2x4, 8 ft, Self-tapping screws, 2-3/4"
Build the 2x4 frame for the headboard — the outside dimensions of the frame are your completed headboard's dimensions, so confirm they match your bed and wall space before cutting.
Tools: Drill / Driver. Materials: 2x4, 8 ft, Self-tapping screws, 2-3/4"
Add the cleats in the position needed to attach to your specific bed frame or footboard, cut to size for your hardware.
Tools: Circular Saw, Drill / Driver. Materials: 1/4" plywood or wood paneling, Screws, brad nails, or staples, 1-1/4", Wood glue (if using nails or staples)
Attach the plywood or paneling to the frame, with the cleats directly against the back side of the panel.
Tools: Staple Gun. Materials: Batting or old comforters, Upholstery fabric, 54" width, Staples
Cover the front of the headboard with batting, padding, or old comforters, stapling neatly at the back. Then cover in your chosen fabric, pulling snug as you go to avoid wrinkles on the front, and staple at the back.
Tools: Drill / Driver
Attach the finished headboard to the wall using a French cleat, or to the bed frame itself, for stability — this headboard must not be left free-standing against a wall.