Firewood Holder Console Table

Build two frames out of the 2x4 long and short rails using 3" screws, two per joint.

Attach the plywood tray liner to the bottom frame with 3/4" brad nails and wood glue.

Attach the front legs to the front of both trays with 1-1/4" brad nails and glue, keeping outside edges flush. Add the single back legs the same way.

Attach the plywood back panel to the project with 3/4" brad nails and glue.

Attach the top board and edge trim with 1-1/4" brad nails and glue. Add supports or hidden storage to the top if desired.

Sand all surfaces and apply paint or stain.