Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

3-in-1 Fire Pit Bench

A curved, trapezoidal fire-pit bench section built from 2x6 slats on angled 2x4 leg sets. Build several to ring a fire pit; each is all 15° cuts.

Cut list

Part	Qty	T × W × L	Material	✓
Leg set top/bottom (short) Long point to long point; both ends 15°, NOT parallel.	2	1 1/2" × 3 1/2" × 17"	2x4	☐
Leg set long members Long point to long point; both ends 15°, NOT parallel.	2	1 1/2" × 3 1/2" × 45 1/2"	2x4	☐
Leg set uprights (tall) Long point to short point; both ends 15°, parallel.	2	1 1/2" × 3 1/2" × 37 1/4"	2x4	☐
Leg set uprights (mid) Long point to short point; both ends 15°, parallel.	2	1 1/2" × 3 1/2" × 23 3/4"	2x4	☐
Leg set uprights (short) Long point to short point; both ends 15°, parallel.	2	1 1/2" × 3 1/2" × 17 1/8"	2x4	☐
Seat slats	12	1 1/2" × 5 1/2" × 47 3/4"	2x6	☐

Item	Qty	✓
2x6, 8 ft (Pressure-treated or cedar) Seat slats.	6 each	☐
2x4, 8 ft (Pressure-treated or cedar) Leg sets.	4 each	☐
Exterior deck screws, 2-3/4"	60 each	☐
Waterproof wood glue	6 oz	☐

Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.