Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

11-Foot Barn Door Media Wall

A wall-spanning unit built from ripped plywood strips — two tall towers flanking a center console, closed by an 11-foot barn door — larger than this catalog's solid-1x12 entertainment center.

Difficulty: Intermediate
Time: 8–10 hrs plus finish
Cost: $$$$

Cut list

Part	Qty	T × W × L	Material	✓
Tower sides	4	3/4" × 15 1/4" × 84"	3/4" plywood, ripped to 15-1/4" strips, full sheet	☐
Tower shelves	12	3/4" × 15 1/4" × 31 3/4"	3/4" plywood, ripped to 15-1/4" strips, full sheet	☐
Center console top	1	3/4" × 15 1/4" × 65 3/4"	3/4" plywood, ripped to 15-1/4" strips, full sheet	☐
Center console shelves	3	3/4" × 15 1/4" × 65 3/4"	3/4" plywood, ripped to 15-1/4" strips, full sheet	☐
Center console sides	2	3/4" × 15 1/4" × 29"	3/4" plywood, ripped to 15-1/4" strips, full sheet	☐
Tower bay supports	4	3/4" × 2 1/2" × 31 3/4"	1x3, 8 ft	☐
Center bay supports	2	3/4" × 2 1/2" × 65 3/4"	1x3, 8 ft	☐
Face frame top/bottom Measure and cut to fit the assembled unit.	2	3/4" × 5 1/2" × 132"	1x6, 12 ft	☐
Face frame stiles Cut to fit each tower edge and the center divider.	6	3/4" × 1 1/2" × 84"	1x2, 8 ft	☐
Door stiles	2	3/4" × 3 1/2" × 76"	1x4, 10 ft (MDF recommended for paint grade)	☐
Door rails	2	3/4" × 3 1/2" × 26"	1x4, 10 ft (MDF recommended for paint grade)	☐
Door panels	2	1/4" × 33" × 76"	1/4" paneling, full sheet (door backs)	☐

Materials

Item	Qty	✓
3/4" plywood, ripped to 15-1/4" strips, full sheet	4 each	☐
1x6, 12 ft	2 each	☐
1x2, 8 ft	4 each	☐
1x2, 6 ft	2 each	☐
1x3, 8 ft	4 each	☐
1x4, 10 ft (MDF recommended for paint grade)	4 each	☐
1/4" paneling, full sheet (door backs)	2 each	☐
Pocket hole screws, 1-1/4"	150 each	☐
Brad nails, 1-1/4"	150 each	☐
Wood glue	6 oz	☐
11 ft barn door hardware kit	1 set	☐
Primer and paint, or stain and poly	1 set	☐

Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.