NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A miniature 1x2 high chair scaled for dolls, with angled side rails, a slatted back, and a nailed-on play tray — a genuine small-scale furniture build, not a toy kit assembly.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side top/bottom rails | 2 | 3/4" × 1 1/2" × 25" | 1x2, 8 ft | ☐ |
| Side front/back legs Both ends cut at 10° off square, parallel to each other. | 2 | 3/4" × 1 1/2" × 18 3/4" | 1x2, 8 ft | ☐ |
| Foot rest supports One end cut at 10° off square. | 2 | 3/4" × 1 1/2" × 4" | 1x2, 8 ft | ☐ |
| Back slat supports One end cut at 10° off square. | 2 | 3/4" × 1 1/2" × 6" | 1x2, 8 ft | ☐ |
| Back slats | 6 | 3/4" × 1 1/2" × 9" | 1x2, 8 ft | ☐ |
| Seat | 1 | 3/4" × 3 1/2" × 10 1/2" | 1x4, small offcut | ☐ |
| Tray | 1 | 3/4" × 7 1/4" × 9" | 1x8, small offcut | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x2, 8 ft | 2 each | ☐ |
| 1x4, small offcut | 1 each | ☐ |
| 1x8, small offcut | 1 each | ☐ |
| Wood screws, 2", or pocket hole screws | 30 each | ☐ |
| Brad nails, 1-1/4" | 10 each | ☐ |
| Wood glue | 1 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Pocket Hole Jig. Materials: 1x2, 8 ft, Wood screws, 2", or pocket hole screws
Build the two chair sides using 2" screws predrilled from the outsides of the chair back and front legs into the ends of the side rails, or pocket holes. Build two identical side frames.
Tools: Drill / Driver. Materials: 1x2, 8 ft, Wood screws, 2", or pocket hole screws, Wood glue
Attach the back slat supports, then the back slats across the two side frames with 2" screws and glue.
Tools: Drill / Driver. Materials: 1x2, 8 ft, Wood screws, 2", or pocket hole screws, Wood glue
Attach the foot rest supports and foot rest board with 2" screws and glue.
Tools: Drill / Driver. Materials: 1x4, small offcut, Wood screws, 2", or pocket hole screws
Position the seat according to the dimensions of the doll that will sit in the chair, then attach.
Tools: Brad Nailer. Materials: 1x8, small offcut, Brad nails, 1-1/4", Wood glue
Attach the tray piece to the top with 1-1/4" brad nails and glue.
Tools: Random Orbit Sander. Materials: Primer and paint, or stain and poly
Sand all surfaces and apply primer and paint, or stain and poly.