Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
DIY Wooden Snowflake
This DIY wooden snowflake is a great build for the holidays!
- Difficulty
- Easy
- Time
- 2.5–4.8 hours
- Cost
- $
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Boards (you'll rip your 1x4 into 2 1 1/2" wide pieces and then cut the following measurements from there) | 2 | 3/4" × 1" × 8" | — | ☐ |
| Center | 1 | 3/4" × 1" × 24" | — | ☐ |
| Diagonals | 4 | 1" × 3" × 12" | — | ☐ |
| End pieces | 12 | 1" × 3" × 3" | — | ☐ |
| Middle pieces | 12 | 1" × 2" × 3" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 3/4" x 3 1/2" x 8' | 1 board | ☐ |
| Box of 1 ¼" pocket hole screws (see tools list) | 1 each | ☐ |
| Wood glue | 1 each | ☐ |
| Stain/ paint and sealant of your choice | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.