NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
This indoor DIY wooden planter is a great addition to any room, and can be customized to any color or finish you choose!
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| 1x12 boards (for sides) | 4 | 1" × 12" × 12" | — | ☐ |
| 1x2 boards (for bottom slats) | 4 | 1" × 2" × 13" | — | ☐ |
| 2x2 boards (for legs) | 4 | 2" × 2" × 15" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12 board, 1x12x6 | 1 board | ☐ |
| 1x2 board, 1x2x6 | 1 board | ☐ |
| 2x2 board, 2x2x6 | 1 board | ☐ |
| 1 1/4" pocket hole screws | 32 each | ☐ |
| Sanding block | 1 each | ☐ |
| Paint or Stain | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Cut your wood to the specified dimensions.
Drill 3 pocket holes along 2 parallel sides of each 1x12x12 boards, and 1 pocket hole at each end of the 1x2 pieces.
Use a sanding block to sand edges smooth.
Using 1 1/4" pocket hole screws, attach 2 legs to one of the 1x12x12 pieces. Repeat. These will be the front and back of the planter.
Attach remaining 1x12x12 pieces (the sides) to the front and back you assembled in the previous step.
Use 1 1/4" pocket hole screws to attach bottom slats (1x2 pieces). You can use a scrap piece of wood as a spacer or just eyeball it and try to space them as evenly as possible. It will not be visible so doesn't have to be perfect.
Finish your planter with any paint or stain of your choice.