NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Check out how we built a DIY three-tiered rolling plant stand to hold all of our small potted plants on the porch.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bottom Shelf | 1 | 3/4" × 18" × 34" | — | ☐ |
| Middle Shelf | 1 | 3/4" × 13" × 34" | — | ☐ |
| Top Shelf | 1 | 3/4" × 9" × 34" | — | ☐ |
| Back Posts | 2 | 3/4" × 3" × 27" | — | ☐ |
| Angled Posts | 2 | 3/4" × 3" × 31" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Sheet Plywood, 4' x 8 ' x 3/4" | 0.5 board | ☐ |
| Box of 1 1/4" Kreg pocket hole screws (See tools list) | 1 each | ☐ |
| Rolling casters | 4 each | ☐ |
| Wood glue | 1 each | ☐ |
| Protective sealant | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.